Custom Straight Bevel Gears

As a leading high-precision straight bevel gear manufacturer, we provide factory-direct custom machining solutions for intersecting-axis power transmission. By cutting and finishing every gear in-house on dedicated bevel gear machines, we guarantee accurate tooth geometry, smooth meshing, and high reliability for your most demanding drive applications.

Precise Tooth Geometry: Gears are cut and finished on dedicated bevel gear machines to ensure correct pitch, profile, and contact pattern for quiet, efficient power transfer.

Free Engineering DFM: Our engineers review your drawings for manufacturability, tooth accuracy requirements, and potential production risks before machining begins.

Prototype to Production: No MOQ required. From single-piece samples to high-volume batches, we deliver consistent quality at every scale.

100% Traceable Quality: Every shipment includes material certificates, heat-treatment records, and gear accuracy inspection reports.

Our Manufacturing Capabilities

We leverage advanced CNC machining and strict quality control to deliver custom straight bevel gears that meet your exact specifications. From standard 90° drives to custom shaft angles, we have you covered.

Gear Types & Features

Gear Type: Straight Bevel Gears

Shaft Angles: 90° Standard & Custom

Mounting: Shaft-Mounted, Flange, Bored with Keyway

Related Profiles: Spiral and Zerol bevel gears available on request.

Machining Process

Turning & Milling: CNC Machining

Gear Cutting: Planning & Formate Cutting

Precision Grinding: Final Surface Finishing

Heat Treatment

Carburizing & Quenching

Induction Hardening

Nitriding

Accuracy & Material

Standards: DIN, ISO, AGMA

Materials: Alloy Steels (42CrMo, 20CrMnTi), Stainless Steels, Brass, etc.

Inspection: 100% per drawing

Our Custom Spline Shaft Projects

Explore our recent custom straight bevel gear projects. Discover how we overcome complex manufacturing challenges—from tooth geometry optimization to post-heat grinding—to meet exact specifications.

Engineer reviewing a 3D gear design on a computer screen for manufacturing optimization

motor shaft 001

Material: 42CrMo4
Heat Treatment: Carburized
Accuracy: DIN 6

View Details →

Precision gear components with calipers and engineering blueprints for DFM review

spline shaft 002

Material: 42CrMo4
Heat Treatment: Carburized
Accuracy: DIN 6

View Details →

Precision gear components with calipers and engineering blueprints for DFM review

spline shaft 001

Material: 42CrMo4
Heat Treatment: Carburized
Accuracy: DIN 6

View Details →

小女孩800600

custom gear shaft

Material: 42CrMo4
Heat Treatment: Carburized
Accuracy: DIN 6

View Details →

composite gear 01

custom spline shaft for tractor-demo

Material: 42CrMo4
Heat Treatment: Carburized
Accuracy: DIN 6

View Details →

Manufacturing in Action

Watch how we machine straight bevel gears from start to finish. From CNC turning and gear cutting to precision grinding, we manage every process internally to maintain tooth accuracy and structural integrity.

CNC Turning & Milling

Machining of gear blanks, mounting faces, and bore features with strict tolerance control.

CNC Gear Cutting

Precision planning and formate cutting to ensure accurate tooth geometry and proper contact patterns.

Post-Heat Precision Grinding

Grinding tooth flanks and bores after heat treatment to correct distortion and hold final accuracy.

Engineering & DFM Review

Every custom straight bevel gear begins with a comprehensive drawing review. We go beyond basic quoting by conducting a full DFM analysis to identify and eliminate production risks before machining begins.

  • 1

    Functional Datum Check

    We verify whether gear runout, mounting distance, and shaft angle requirements are referenced to the correct bearing bores or mounting surfaces.

  • 2

    Heat-Treat Distortion Planning

    We evaluate your material and hardness requirements to ensure the finishing sequence protects tooth accuracy and bore fits after hardening.

  • 3

    Feature Accessibility

    We check for tool clearance and grinding reach when multiple features—hub, bore, keyway, and teeth—exist on one bevel gear.

  • 4

    DFM Feedback Before Quote

    If we spot any risks or missing tolerances, our engineers will provide a DFM note before pricing is finalized.

Quality Inspection & Reports

We believe in full transparency. Every custom straight bevel gear is thoroughly measured and documented so you can verify it meets your exact requirements.

100% Inspection & Traceability

Every custom straight bevel gear undergoes rigorous dimensional and gear accuracy inspections before shipment. Verified against ISO standards, we provide full traceability—from raw material certificates to final inspection reports.

Strict Process Control

We execute a rigorous quality control plan for every batch. From incoming material verification to in-process checks and final inspection, every step is governed by strict SOPs to prevent defects and ensure absolute reliability.

放真实的检测报告+公司logo或检验红章

Material Certificate

Chemical composition & mechanical properties

Heat Treatment Report

Hardness, case depth & microstructure

Dimension Report

Critical dimensions & tolerance verifications

Accuracy & Meshing Report

Profile, pitch & tooth contact pattern

Our Custom Review Process

Every custom straight bevel gear is unique. We engineer a dedicated manufacturing route based on your drawing to ensure precise feasibility and accurate quotations.

1

Drawing Submission

Submit your 2D/3D drawings. Our engineers will quickly review the datums and requirements.

2

DFM Review

We evaluate feature access, heat-treat distortion, and datum structure to prevent production errors.

3

Route & Quote

You receive a transparent quote based on the exact manufacturing and inspection route.

4

First Article

We machine and verify the first article against agreed dimensions and accuracy standards.

5

Production

Batch machining begins with strict in-process checks and ends with full inspection reports.

Related Products

Explore our other gear manufacturing capabilities to support your complete transmission system.

Spiral Bevel Gears

Higher speed, quieter operation. A performance upgrade for intersecting-axis drives.

View Products →

Zerol Bevel Gears

A direct alternative to straight bevel gears. Smoother running with lower axial thrust than spiral bevel gears.

View Products →

Spline Shafts

High-torque transmission. Precision involute splines for reliable power delivery.

View Products →

Helical Gears

Smooth and quiet operation. Designed for high load capacity and reduced vibration.

View Products →

Straight Bevel Gear FAQs

What is a straight bevel gear, and when should I use it?

A straight bevel gear is a type of bevel gear used for intersecting-axis drives, usually at 90°. Its tooth line is a radial straight line that tapers from the heel to the toe along the cone generatrix, and all tooth lines converge at the intersection of the two shaft axes when extended. Almost the entire face width enters and leaves mesh at the same time, so the contact ratio is low—typically about 1.1–1.3, compared with around 2.0 for spiral bevel gears—and there is noticeable rigid impact during meshing, manifesting as periodic angular velocity fluctuation and relatively high noise.
 
There are three core reasons for choosing it. First, it offers the greatest manufacturing cost and manufacturability advantage: the straight tooth form does not require the dedicated spiral milling equipment needed for spiral bevel gears; the machining route is shorter, and tooling and cutter costs are lower. In cost-sensitive medium-volume scenarios, the unit cost is clearly lower than that of spiral bevel gears. Second, axial force is small and its direction does not change with the hand of rotation: bearings only need to carry basic radial loads and minor locating forces, greatly reducing constraints on housing design and bearing selection. The system cost savings from simplified design often exceed the price difference of the gears themselves. Third, transmission efficiency is high and the gear is insensitive to operating environment: meshing is mainly rolling contact with low friction loss, and it adapts well to temperature, humidity, and lubricant properties, making reliability easier to maintain in agricultural machinery or outdoor equipment with limited maintenance conditions.
 
Straight bevel gears have lower load capacity than spiral bevel gears and do not run quietly. They are suitable for low-speed, medium-to-low-load applications, and their average pitch line velocity is generally considered to be below 5 m/s. If an application requires higher speed, greater torque density, or lower noise, spiral bevel gears or Zerol bevel gears are the reasonable choice. The prerequisite for choosing straight bevel gears is that the application’s speed and load levels do not reach their noise and load-capacity limits.
 
Typical applications of straight bevel gears include: pinion gears and side gears in automotive differentials; right-angle drives in power tools such as angle grinders and drills, where loads are light, volumes are large, cost sensitivity is high, and powder metallurgy straight bevel gears are used in large quantities; tractor front-axle drives, seed drill power distribution, and harvester auxiliary drives in agricultural machinery; medium-to-low-speed transmission locations in construction machinery; feed mechanisms and 90° direction-change auxiliary drives in machine tools and general machinery; and right-angle direction changes and low-to-medium-power transmission devices in hand tools and electromechanical equipment. The common characteristics of these applications are moderate-to-low speeds, medium-to-low loads, clear batch or cost pressure, and greater tolerance for noise than sensitivity to price—scenarios in which the trade-offs of straight bevel gears fall on the reasonable side.
 
 

What information do I need to provide for an accurate quote?

Please provide a complete 2D drawing or 3D model (STEP/DWG), including module, number of teeth, pressure angle, shaft angle, mounting distance, accuracy grade, material, and heat treatment requirements. If you have a sample or reference part, it can also help us quote faster and more accurately. If certain tolerances or datums are not marked on the drawing, our engineering team will provide DFM feedback before quoting.

How do you control distortion during heat treatment?

We reserve appropriate machining allowance based on material, hardness requirements, and gear structure, and arrange post-heat grinding of tooth flanks and bores to correct quenching distortion. For distortion-sensitive structures, we evaluate process measures such as press quenching, fixture correction, or adjusted furnace loading. Final precision grinding after heat treatment ensures tooth accuracy and mounting fit dimensions.

I have a broken or worn-out part without drawings. Can you do reverse engineering to replicate it?

Yes, absolutely. No drawings? No problem. We offer comprehensive reverse engineering services with the following secure process:

  1. Precision 3D Scanning: We accurately capture every dimension and complex gear profile directly from your physical sample.
  2. Material Analysis: We use a spectrometer to verify the exact metal grade and heat treatment, ensuring the replacement part performs identically to the original.
  3. Drawing Generation & Approval: We recreate the 2D/3D CAD drawings and send them to you for approval before machining begins.

Do you provide prototypes for testing?

Absolutely. We support prototyping with no MOQ. We believe there are no big or small projects—only opportunities to grow together. We use the prototype phase to finalize your manufacturing route and minimize potential risks before mass production.

How is tooth contact and accuracy verified?

Inspection is strictly referenced to functional datums, using gear measuring centers and contact pattern checks to verify profile, pitch, runout, and mounting distance. For critical applications, we provide tooth contact pattern reports and dimensional inspection reports. Contact pattern checks confirm that the meshing area is located correctly on the tooth surface, avoiding edge contact or localized stress concentration.

Can you manufacture custom shaft angles or complex bevel gear features?

Yes. We support custom shaft angles, hubs, keyways, bores, flanges, and mounting faces. Before machining, our engineering team reviews tool accessibility, grinding clearance, and assembly requirements to confirm manufacturability. For bevel gears with multiple integrated features, we identify potential interference or datum conflicts during the DFM stage and confirm with you before quoting.

custom straight bevel gear manufacturing

Looking for Custom Straight Bevel Gears?

From gear dimensions and tooth specifications to material selection, we’ll help you evaluate the manufacturing requirements for your application.

Tell Us About Your Project

Share your project requirements, and our team will get back to you.

📎   Need to share drawings?